HomeServices

01Capabilities

End-to-end automation,
concept to commissioning

Seven practices, one engineering team. We scope, build, integrate and commission the systems that keep your plant running — and stay long enough to make sure they do.

Six-axis ABB robot lifting moulded automotive panels in a robotic handling cell

Programming

PLC, HMI and SCADA development. Structured, simulated and tested before deployment. MES and SQL integration for full traceability.

Rockwell · Siemens · Schneider · Mitsubishi

Digital twin simulation

A working model of your plant, generated from the control project. Sequence, interlocks and throughput proven before anyone travels to site.

Virtual commissioning · Throughput studies · Operator training

Industrial vision

Smart QA and inspection. Traceability, precision and product quality across manufacturing, food and beverage and packaging lines.

Vendor agnostic · Deep-learning defect detection

Consultancy

Practical automation and safety advice. Concept-to-commissioning alignment, machine and process safety, and project documentation.

FEED · SIL determination · Regulatory documentation

Commissioning

On-site, remote and hybrid commissioning. Every device, control loop and safety system verified before handover.

Loop checks · FAT · SAT · Operator training

Machine safety

CMSE-certified risk assessments and SISTEMA calculations, carried through to verified performance levels on the floor.

AS/NZS 4024 · ISO 13849

Documentation

Every project leaves behind a record the next engineer can work from, issued as-built.

Functional design specification
Electrical and GA drawings
I/O and cable schedules
Control philosophy and sequence of operation
FAT, SAT and commissioning records
Risk assessments and SISTEMA reports
Software backups and revision history
O and M manuals and training packs

02Practice depth

Where each service
goes deep

Each practice carries its own platforms, standards and deliverables. One engineer of record is responsible for keeping them working as one.

01 — Programming

Code that controls industry

PLC, HMI and SCADA development. We write structured, maintainable code, simulate it in test, and only then take it on site. MES and SQL integration give you full traceability — what was made, when, with what.

PLC platforms: Rockwell, Siemens, Schneider, Mitsubishi
HMI and SCADA: Citect, Ignition, FactoryTalk, WinCC
MES and SQL integration for batch and traceability data
Standards aligned: ISA-88, ISA-95, GAMP 5

Explore programming

Controls engineer working on PLC and HMI development

Automated pallet freezer storage system with elevators and pallet conveyors

02 — Digital twin simulation

Proven before you pay for site time

A working model of the plant, generated from the control project rather than modelled by hand. Your code runs against it, the faults get found in an office, and the shutdown is spent commissioning instead of debugging.

Model generated from the control project, not hand-built
Real control code tested against the model before travel
Throughput, bottleneck and buffer studies at design stage
Operator training on faults you cannot safely stage on the plant

Explore digital twin simulation

03 — Industrial vision

Precision at every stage

Smart QA and inspection systems that enhance traceability, precision and product quality. Applied across manufacturing, food and beverage, and packaging — wherever the eye matters.

2D and 3D inspection, OCR, presence and absence checks
Reject and divert integration with the line PLC
Per-unit traceability tied to MES batch records
Vendor agnostic: Cognex, Keyence, Omron, Basler

Talk to an engineer

Industrial machine vision cameras on a gantry above an inspection bed

Process plant interior with stainless silos and gantries

04 — Consultancy

Where ideas become automation

Practical automation and safety advice — early, before the budget is locked. Concept-to-commissioning alignment, machine and process safety, and the project documentation that keeps everyone honest.

Automation feasibility and FEED studies
Machine safety to AS 4024 and ISO 13849
Process safety and SIL studies to IEC 61508 and 61511
Control philosophies, SOWs, FAT and SAT plans, operator manuals

Request a scope

05 — Commissioning

Where design meets operation

On-site, remote and hybrid commissioning. Every device, control loop and safety system verified before handover. Global capability for projects requiring international support.

Loop checks, I/O verification, point-to-point testing
FAT and SAT to the customer or AS and IEC test pack
Hybrid commissioning: remote engineer plus local hands
Operator training and runbook handover

See a hybrid commissioning job

Industrial inspection station inside a working facility

ABB articulated robot handling parts inside a guarded cell

06 — Machine safety

Certified to the highest standard

CMSE-certified machinery safety assessments. Risk assessment to ISO 12100 and AS/NZS 4024, SISTEMA calculations to ISO 13849, safety function design, and validation documentation — signed off by a Certified Machinery Safety Expert.

Risk assessment to ISO 12100 and AS/NZS 4024.1
PLr determination and SISTEMA PLe calculations
Functional safety validation testing
Modification re-assessment for existing plant

Read the standards guide

07 — Documentation

Issued as-built

Every project leaves behind a record the next engineer can work from. Drawings that match the panel, a control philosophy that matches the code, and a software backup that matches what is running.